This project is developed for the users to rotate the back wheel of a two wheeler using propeller shaft. Usually in two wheelers, chain and sprocket method is used to drive the back wheel. But in this project, the Engine is connected at the front part of the vehicle. The shaft of the engine is connected with a long rod. The other side of the long rod is connected with a set of bevel gears. The bevel gears are used to rotate the shaft in 90 o angle. The back wheel of the vehicle is connected with the bevel gear(driven). Thus the back wheel is rotated in perpendicular to the engine shaft. Thus the two wheeler will move forward. According to the direction of motion of the engine, the wheel will be moved forward or reverse. This avoids the usage of chain and sprocket method.
               A shaft-driven bicycle is a bicycle that uses a drive shaft instead of a chain to transmit power from the pedals to the wheel. Shaft drives were introduced over a century ago, but were mostly supplanted by chain-driven bicycles due to the gear ranges possible with sprockets and derailleur. Recently, due to advancements in internal gear technology, a small number of modern shaft-driven bicycles have been introduced.
                  Shaft-driven bikes have a large bevel gear where a conventional bike would have its chain ring. This meshes with another bevel gear mounted on the drive shaft. The use of bevel gears allows the axis of the drive torque from the pedals to be turned through 90 degrees. The drive shaft then has another bevel gear near the rear wheel hub which meshes with a bevel gear on the hub where the rear sprocket would be on a conventional bike, and canceling out the first drive torque change of axis.

Image Courtesy :Slideshare.Net                                                                                                    
                                  The term Drive shaft is used to refer to a shaft, which is used for the transfer of motion from one point to another. Whereas the shafts, which propel (push the object ahead) are referred to as the propeller shafts. However the drive shaft of the automobile is also referred to as the propeller shaft because apart from transmitting the rotary motion from the front end to the rear end of the vehicle, these shafts also propel the vehicle forward. The shaft is the primary connection between the front and the rear end (engine and differential), which performs both the jobs of transmitting the motion and propelling the front end. Thus the terms Drive Shaft and Propeller Shafts are used interchangeably. In other words, a drive shaft is a longitudinal power transmitting, used in vehicle where the pedal is situated at the human feet. A drive shaft is an assembly of one or more tubular shafts connected by universal, constant velocity or flexible joints. The number of tubular pieces and joints depends on the distance between the two wheels.

• Smooth driving
• Easier to transport
• Low cost of ownership
• Cleaner
• Racing
• Off-road riding
• Cycling

               Firstly the project were unable to be completed with the drive shaft due to various problems around circumference of the bicycle ,later on this was realized to run successfully with two bevel gears at both end of the drive shaft.
               The presented work was aimed to reduce the wastage of human power (energy) on bicycle riding or any machine, which employs drive shafts; in general it is achieved by using light weight drive shaft with bevel gears on both sides designed on replacing chain transmission. The presented work also deals with design optimization i.e converting rotary motion in linear motion with aid of two bevel gears.
Reference Download Paper:
If you are Interested In this Project then Buy It
This Project or Check Inquiry
Mr. Akash K. S.
Email ID: akash@cognitioninfosystems.com
If you want to
Advertise your Project then
Contact Us.
Spread the love